Solid UHMWPE Cribbing Blocks are durable rectangular support blocks designed for cranes, outriggers, industrial machinery and heavy equipment requiring additional setup height. A typical reference size is approximately 650 × 150 × 150 mm with a weight of around 13.5–14.5 kg. The solid structure, textured working surface, integrated rope handle and reusable UHMWPE construction make the blocks suitable for repeated equipment support applications.
Solid UHMWPE Cribbing Blocks are heavy-duty rectangular support blocks designed to provide additional height beneath crane outriggers, equipment stabilizers, industrial machinery, service vehicles, lifting equipment, and other supported loads. Manufactured from ultra-high-molecular-weight polyethylene, these reusable blocks provide a practical alternative to improvised timber support where consistent dimensions, moisture resistance, repeated handling, and organized equipment setup are important.
The product shown features a solid black rectangular structure, a fine textured working surface, and an integrated rope carrying handle. Unlike thin support plates, this product uses a substantial block section to create additional vertical support height between the equipment and the supporting surface.
The simple flat working surface makes the block suitable for individual support applications and compatible multi-component arrangements. Depending on the operating requirements, the block may be used alone, positioned above a suitable base support pad, or combined with other approved equipment support components.
Unlike an outrigger pad, which is primarily used to increase the effective ground contact area beneath an equipment foot, a cribbing block is mainly used to create additional height. The two product types can perform different functions within the same complete support arrangement.
A practical reference size for the product shown is approximately 650 × 150 × 150 mm. For a solid UHMWPE block of this size, the reference product weight is approximately 13.5–14.5 kg, depending on actual material density, dimensional tolerance, textured surfaces, carrying-handle holes, and final machining details.
| Specification | Typical Reference |
|---|---|
| Product type | Solid rectangular equipment cribbing block |
| Main reference size | 650 × 150 × 150 mm |
| Reference weight | Approximately 13.5–14.5 kg |
| Primary material | UHMWPE |
| Reference color | Black |
| Working surface | Fine textured flat surface |
| Handling feature | Integrated flexible rope handle |
| Main function | Equipment support and additional setup height |
The approximately 650 × 150 × 150 mm format provides a practical balance between block length, 150 mm support height, individual handling, equipment storage, and repeated transportation.
The exact finished weight should always be confirmed from the final product dimensions because handle holes, edge machining, material density, and other structural details can change the weight.
Solid UHMWPE Cribbing Blocks can be supplied in several rectangular dimensions for different equipment support requirements.
Typical reference options include:
| Reference Size | Approx. Solid Weight | Typical Application |
|---|---|---|
| 500 × 150 × 150 mm | Approximately 10.5–11 kg | Compact machinery support and limited storage areas |
| 600 × 150 × 150 mm | Approximately 12.5–13.5 kg | General equipment and stabilizer support |
| 650 × 150 × 150 mm | Approximately 13.5–14.5 kg | Common heavy equipment cribbing applications |
| 700 × 180 × 150 mm | Approximately 17.5–18.5 kg | Wider support requirements |
| 800 × 200 × 150 mm | Approximately 22–23.5 kg | Larger machinery and equipment support |
The weights above are practical reference values for solid UHMWPE products. Actual finished weights may vary according to material grade, density, dimensional tolerance, textured surfaces, handle openings, edge shape, and machining.
A longer or heavier block should not automatically be selected for every application. The correct dimensions should match the required support height, equipment geometry, available contact area, handling method, storage space, and complete support arrangement.
| Specification | Typical Reference |
|---|---|
| Product type | Solid equipment cribbing and support block |
| Primary material | UHMWPE |
| Structure | Solid rectangular block |
| Reference color | Black |
| Other practical colors | Yellow and other application-specific colors |
| Typical block height | Approximately 150 mm |
| Upper surface | Textured flat working surface |
| Handling feature | Rope carrying handle |
| Typical use | Heavy equipment support and height adjustment |
Final product dimensions, material grade, surface structure, handle configuration, and complete installation arrangement should always be selected according to the actual equipment and operating conditions.
The most important structural characteristic of Solid UHMWPE Cribbing Blocks is the substantial rectangular body.
Unlike hollow support components or thin sheets, the block uses a solid section to provide a defined support height.
The rectangular format allows the product to be:
The flat geometry also makes it easier to visually check the primary working surfaces before equipment loading.
A common reference block height is approximately 150 mm.
This makes the product useful where additional vertical height is required between the equipment support point and the supporting surface.
Typical reasons for requiring additional height include:
Adding support height also changes the complete support geometry. The total arrangement should therefore consider base area, load position, component contact, support height, equipment reaction, and lateral stability.
Additional blocks should not simply be stacked because more height is required. The complete setup should remain appropriate for the equipment and operating conditions.
The upper face of the product shown uses a fine textured surface rather than a highly polished plastic face.
This surface structure creates a clearly defined working area and can provide additional surface interaction compared with a completely smooth block.
The textured surface can be useful for:
The surface texture does not replace correct equipment positioning, stable support, suitable product selection, or regular inspection.
Large stones, metal pieces, timber fragments, or other hard objects should not remain trapped between the main working surfaces because they can create concentrated contact areas.
Unlike strongly interlocking cribbing systems, the product shown uses a relatively simple flat working surface.
This provides flexibility for compatible support arrangements where a flat contact face is preferred.
Possible uses include:
The complete arrangement should always maintain appropriate contact between the major working surfaces.
A block supported only at a small edge or positioned across a large void can behave differently from the same product installed with suitable support beneath its primary working area.
The product shown includes a flexible rope-style carrying handle installed at one end of the block.
The handle creates a defined gripping point when the block needs to be:
The flexible handle can be folded close to the block when not in use.
Before lifting, inspect:
The carrying handle should be treated as a handling feature rather than a load-bearing component for supporting equipment.
The primary material used for Solid UHMWPE Cribbing Blocks is ultra-high-molecular-weight polyethylene.
UHMWPE provides a practical combination of:
These characteristics make the material suitable for equipment support products that are repeatedly transported, positioned, removed, cleaned, inspected, and stored.
Unlike steel support components, UHMWPE does not rust.
Compared with traditional timber cribbing, manufactured plastic blocks do not depend on natural wood grain, knots, or changing moisture content.
Timber has traditionally been used for equipment blocking and cribbing because it is widely available and can be cut into rectangular sections.
However, natural timber characteristics may vary according to:
Manufactured UHMWPE support blocks provide another option where consistent dimensions, low water absorption, repeated use, and easier cleaning are important.
Practical product characteristics include:
The correct support product should still be selected according to actual equipment requirements and the complete operating condition.
Solid UHMWPE Cribbing Blocks can be used for different machinery support and temporary height-adjustment applications.
Typical equipment and uses include:
The exact product size and arrangement should always be matched to the actual equipment and support requirements.
Cranes and other outrigger-equipped machinery may require additional support height because of equipment geometry or differences in the surrounding surface level.
Important considerations include:
The support arrangement should not be selected only according to total machine weight.
Different support points can experience different forces according to the equipment configuration and operating condition.
Solid cribbing blocks can also be used during selected machinery support, maintenance, and positioning operations.
Possible applications include:
The supporting load should be positioned over the intended working area of the block.
The complete support system should be stable, appropriately supported, and suitable for the applied forces.
Rectangular support blocks may also be used in selected industrial material-handling and relocation applications.
The solid structure can provide a defined temporary support position for:
Any support arrangement should be evaluated according to the actual load, contact area, support position, and surrounding operating environment.
Cribbing blocks and outrigger pads have different primary functions.
An outrigger pad is mainly intended to increase the effective contact area between an equipment stabilizer and the supporting ground.
A cribbing block is mainly intended to provide additional vertical height or create a blocking structure.
A complete equipment support arrangement may therefore include:
The exact arrangement depends on the selected support system and equipment requirements.
Appropriate contact between working surfaces is important when using Solid UHMWPE Cribbing Blocks.
Before applying equipment load, check that:
A block with full support beneath its primary working area can behave differently from the same product placed across a severe depression or unsupported gap.
Cribbing blocks may be considered where additional height is needed because of equipment geometry or differences in the surrounding surface level.
Before setup, inspect the area for:
A cribbing block should not be used to make an unsuitable or unstable underlying support condition automatically safe.
Very weak or severely uneven surfaces may require preparation, a larger base support system, or another engineered solution.
Block weight increases with product length, width, and height.
For example:
Handling methods should match the actual product weight and workplace conditions.
Larger products may require team handling or suitable mechanical handling methods.
A major advantage of Solid UHMWPE Cribbing Blocks is their reusable construction.
After equipment operation is completed, the blocks can be:
The consistent rectangular geometry makes complete equipment support sets easier to organize during transportation and storage.
Reusable equipment support components should be inspected before demanding applications.
Check:
A damaged block should be evaluated before being returned to heavy equipment support service.
The supporting surface and complete equipment arrangement should also be checked whenever the machine is repositioned.
Mud, sand, gravel, oil, and other debris can remain on cribbing blocks after outdoor operation.
Cleaning can help:
Large debris trapped between support surfaces should be removed before equipment loading.
The regular rectangular design makes the blocks practical for organized transportation and storage.
During storage:
Handling and stacking procedures should match the actual product dimensions and weight.
You can also view our complete range of crane outrigger pads for mobile cranes, concrete pumps, boom trucks, lifting equipment, stabilizer systems, cribbing support, and related heavy machinery applications.
For additional information about engineered plastic cribbing products and equipment support applications, you can review this external resource on plastic cribbing block solutions.
Solid UHMWPE Cribbing Blocks provide a practical equipment support solution where cranes, industrial machinery, service vehicles, maintenance equipment, and other supported loads require additional setup height. Their solid rectangular construction, durable UHMWPE material, textured working surface, integrated rope handle, multiple size options, and reusable design make them suitable for repeated support applications.
A typical reference size for the product shown is approximately 650 × 150 × 150 mm with an approximate unit weight of 13.5–14.5 kg. Other practical sizes include approximately 500 × 150 × 150 mm, 600 × 150 × 150 mm, 700 × 180 × 150 mm, and 800 × 200 × 150 mm.
Final product dimensions, material grade, support height, contact area, handle configuration, and installation arrangement should always be selected according to the actual equipment, applied forces, supporting surface, and operating requirements.
Check drawings for full specifications and confirm materials according to service conditions to prevent product defects.
Inspect all key processing steps and fully verify dimensions, holes, grooves and fitting surfaces.
Deburr, chamfer and clean products for easy installation. Ensure uniform quality among batch products.
Choose appropriate packaging solutions based on product features to protect goods from collision, deformation and mixing during transit.
Unlike metal parts, engineering plastic components still require strict control over dimensions, holes, edges, surface, materials and assembly performance for equipment use.
Engineering plastic parts suit friction, guide, support, buffer, anti-corrosion and insulation areas. We supply UHMWPE, POM, PA, PP/PE components for conveyor, food, mining, machinery, chemical and cable systems, with custom OEM service available.
Stay updated with our latest industry insights, company updates and featured articles.
Engineering plastics are increasingly used in industrial machinery, automated production lines, conveyor systems, packaging equipment, and food-processing machines. Materials such as nylon, UHMWPE, POM, and
Both are lightweight, corrosion-resistant, wear-resistant, and suitable for CNC machining. However, they perform very differently
Wear is a common cause of failure in conveyor systems, packaging machinery, automated equipment, mining
CNC machining is widely used to produce plastic prototypes, low-volume parts, replacement components, jigs, fixtures,
Both are lightweight, corrosion-resistant, wear-resistant, and suitable for CNC machining. However, they perform very differently
Wear is a common cause of failure in conveyor systems, packaging machinery, automated equipment, mining
CNC machining is widely used to produce plastic prototypes, low-volume parts, replacement components, jigs, fixtures,
Need UHMWPE sheets & custom plastic machined/OEM parts？Send specs & material needs, free quote within 24h.
