Diamond Pattern UHMWPE Outrigger Pads are reusable rectangular support panels featuring raised anti-slip working surfaces and integrated carrying handles. Practical reference sizes include 800 × 300 × 40–50 mm, 1000 × 300 × 40–60 mm, 1200 × 400 × 60–80 mm and 1500 × 500 × 60–100 mm for mobile cranes, concrete pumps, boom trucks and other stabilizer-equipped machinery.
Diamond Pattern UHMWPE Outrigger Pads are solid engineering-plastic support panels designed for mobile crane outriggers, boom truck stabilizers, concrete pump support legs, truck-mounted cranes, aerial work platforms and other machinery that uses hydraulic stabilizers during operation.
The product shown features a long rectangular structure, a raised diamond-pattern working surface and an integrated flexible carrying handle. The rectangular format provides a different support geometry from conventional square or round outrigger pads and can be useful where the equipment foot or available installation area requires a narrower support panel.
The raised diamond pattern creates a clearly identifiable working face and provides additional surface texture. Matching panels can be stacked together for transportation, equipment storage and repeated use.
Unlike temporary roadway mats that are installed continuously to create a vehicle-access route, outrigger support pads are positioned directly beneath individual stabilizer feet. Their main purpose is to increase the geometric contact area between the original equipment foot and the underlying support surface.
The exact dimensions of the products shown cannot be confirmed from the photograph alone. The following specifications are practical reference sizes for this type of long rectangular UHMWPE support pad.
| Reference Size | Reference Thickness | Typical Application |
|---|---|---|
| 600 × 300 mm | 30–40 mm | Compact stabilizers and smaller service equipment |
| 800 × 300 mm | 40–50 mm | Utility vehicles and compact crane support |
| 1000 × 300 mm | 40–60 mm | General boom trucks and mobile equipment |
| 1000 × 400 mm | 50–60 mm | Medium stabilizer support requirements |
| 1200 × 400 mm | 60–80 mm | Concrete pumps and medium heavy equipment |
| 1500 × 500 mm | 60–100 mm | Large stabilizers and heavy-equipment support |
The approximately 600 × 300 × 30–40 mm and 800 × 300 × 40–50 mm formats provide relatively compact options where equipment-storage space and repeated handling are important.
The approximately 1000 × 300 × 40–60 mm format provides a long, narrow support area for selected stabilizers and machinery-support arrangements.
The approximately 1000 × 400 × 50–60 mm and 1200 × 400 × 60–80 mm formats provide broader support areas while retaining the practical rectangular structure.
Larger formats such as approximately 1500 × 500 × 60–100 mm require additional consideration for finished weight, transportation, storage and handling methods.
These dimensions are reference product options rather than universal safe-working-load ratings. Final dimensions and thickness should be selected according to the maximum reaction at one stabilizer, original equipment-foot dimensions, required support area, UHMWPE material grade, panel stiffness and supporting surface condition.
| Specification | Typical Reference |
|---|---|
| Product type | Rectangular crane and heavy-equipment outrigger support pad |
| Primary material | UHMWPE |
| Main shape | Long rectangular |
| Alternative shapes | Square, round and clipped-corner formats |
| Working surface | Raised diamond-pattern anti-slip surface |
| Reference length range | Approximately 600–1500 mm |
| Reference width range | Approximately 300–500 mm |
| Reference thickness range | Approximately 30–100 mm |
| Handling feature | Integrated flexible carrying handle |
| Storage structure | Stackable matching support-pad sets |
| Main applications | Mobile cranes, boom trucks, concrete pumps and heavy equipment |
Final dimensions, thickness, material grade, diamond-pattern depth, surface structure, outside shape and handle arrangement should always be selected according to the actual equipment and operating requirements.
The defining feature of Diamond Pattern UHMWPE Outrigger Pads is the raised geometric pattern covering the main working surface.
The intersecting raised sections form a repeating diamond-shaped structure across the panel. This provides a different working face from smooth, fine-textured, circular-recessed or cross-ribbed support pads.
The diamond-pattern surface provides:
The raised surface pattern should not be treated as a replacement for correct pad sizing, suitable panel thickness, stable ground or proper stabilizer positioning.
Mud, oil, gravel, metal fragments and other debris should be removed from the patterned working face before the equipment load is applied.
The product uses a long rectangular panel instead of a conventional square format.
A rectangular structure can be considered where:
The rectangular pad should be positioned so that its length and width correspond with the intended equipment-support direction.
The original stabilizer foot should remain inside the intended working area and should not be positioned close to an unsupported outside edge.
The reference product includes a flexible carrying handle installed at one end of the rectangular panel.
The handle provides a defined gripping position when the pad needs to be:
Before moving the support panel, inspect:
The handle is intended for moving and positioning the panel. It should not be treated as a structural component supporting the crane or stabilizer load.
Large-format rectangular pads may require coordinated team handling or suitable mechanical handling equipment even when a carrying handle is installed.
The long rectangular structure allows matching Diamond Pattern UHMWPE Outrigger Pads to be organized and stacked as equipment-support sets.
Stackable products can help with:
The storage surface should be reasonably level and capable of supporting the combined weight of the complete stack.
Hard stones, metal fragments and other debris should be removed before the products are stacked.
The primary material used for Diamond Pattern UHMWPE Outrigger Pads is ultra-high-molecular-weight polyethylene, commonly abbreviated as UHMWPE.
UHMWPE is a thermoplastic polyethylene with extremely long molecular chains. It is associated with high toughness, impact strength, extremely low moisture absorption, low friction and strong abrasion resistance.
For a general material explanation, see the Wikipedia article about ultra-high-molecular-weight polyethylene.
Practical UHMWPE characteristics for reusable equipment-support pads include:
Chemical resistance should not be interpreted as universal resistance to every substance. Actual compatibility depends on the chemical, concentration, exposure temperature, contact time and selected UHMWPE grade.
Outrigger support pads are repeatedly transported, positioned, loaded, recovered and stored.
During regular operation, the panels may experience:
The toughness and impact resistance of UHMWPE make the material practical for reusable industrial support components.
Impact resistance does not remove the need for inspection. Products showing serious cracks, deep cuts, severe deformation or damaged handle-attachment points should be evaluated before reuse.
The lower surface of the support pad may contact compacted soil, gravel, asphalt, concrete and other industrial surfaces.
Repeated positioning can result in:
The abrasion resistance of UHMWPE is useful for panels that need to be transported, positioned and reused many times.
The outside edges, patterned surface, lower face and handle attachment areas should still be inspected regularly.
Mobile cranes, boom trucks and concrete pumps frequently operate in outdoor environments.
The support pads may be exposed to:
The extremely low moisture absorption of UHMWPE makes it suitable for reusable support components operating in wet or changing environments.
The products should still be cleaned and inspected after wet, muddy or contaminated operations.
A hydraulic outrigger or stabilizer transfers a concentrated reaction through a relatively small original equipment foot.
Diamond Pattern UHMWPE Outrigger Pads create a larger geometric contact area beneath that equipment foot.
The performance of the complete support arrangement depends on:
A larger panel creates a larger geometric footprint, but outside dimensions alone should not be treated as a universal safe-working-load guarantee.
The correct support pad should not be selected only according to total vehicle weight or the rated lifting capacity of the equipment.
Individual outrigger reactions can vary according to:
Important selection factors include:
Each support position should be evaluated separately because equipment reactions and supporting conditions can differ around the same machine.
Two rectangular pads with the same length and width can perform differently when their thicknesses are different.
For example, a 1000 × 300 mm pad may be considered as:
A 1200 × 400 mm panel may be considered as:
Panel thickness can affect:
The final thickness should be selected according to the stabilizer reaction, original equipment-foot dimensions, UHMWPE grade, required support area and supporting surface condition.
Diamond Pattern UHMWPE Outrigger Pads can be used with many types of stabilizer-equipped machinery.
The correct dimensions, thickness, material grade and panel orientation should always be matched to the actual equipment-support point.
Mobile crane outrigger reactions can vary according to boom direction, working radius, lifted load, crane geometry and outrigger extension.
Before selecting a support pad, consider:
The same crane may require different support arrangements at different operating locations or configurations.
Concrete pumps and boom trucks use hydraulic stabilizers to create a wider operating base.
Important selection factors include:
Each stabilizer location should be evaluated independently because reactions and supporting conditions can differ around the same equipment.
Correct positioning is important when using Diamond Pattern UHMWPE Outrigger Pads.
Before applying the equipment load, confirm that:
The diamond-pattern working surface should remain free from excessive oil, mud, stones and metal debris.
Reusable support pads should be inspected before demanding equipment use.
Check:
After operation, remove mud, sand, gravel, oil and other debris from the main working surfaces.
During storage:
You can also view our complete range of crane outrigger pads for mobile cranes, concrete pumps, boom trucks, hydraulic stabilizer systems, cribbing products and other heavy machinery applications.
Diamond Pattern UHMWPE Outrigger Pads provide a practical support solution for mobile cranes, truck-mounted cranes, boom trucks, concrete pumps and other stabilizer-equipped machinery.
The product combines solid UHMWPE construction, a raised diamond-pattern working surface, a long rectangular structure and an integrated carrying handle.
Typical reference specifications include approximately 600 × 300 × 30–40 mm, 800 × 300 × 40–50 mm, 1000 × 300 × 40–60 mm, 1000 × 400 × 50–60 mm, 1200 × 400 × 60–80 mm and 1500 × 500 × 60–100 mm.
Final dimensions, thickness, UHMWPE material grade, effective support area, diamond-pattern structure and handle configuration should always be selected according to the maximum individual stabilizer reaction, original equipment-foot dimensions, supporting surface condition and actual operating requirements.
Check drawings for full specifications and confirm materials according to service conditions to prevent product defects.
Inspect all key processing steps and fully verify dimensions, holes, grooves and fitting surfaces.
Deburr, chamfer and clean products for easy installation. Ensure uniform quality among batch products.
Choose appropriate packaging solutions based on product features to protect goods from collision, deformation and mixing during transit.
Unlike metal parts, engineering plastic components still require strict control over dimensions, holes, edges, surface, materials and assembly performance for equipment use.
Engineering plastic parts suit friction, guide, support, buffer, anti-corrosion and insulation areas. We supply UHMWPE, POM, PA, PP/PE components for conveyor, food, mining, machinery, chemical and cable systems, with custom OEM service available.
Stay updated with our latest industry insights, company updates and featured articles.
Engineering plastics are increasingly used in industrial machinery, automated production lines, conveyor systems, packaging equipment, and food-processing machines. Materials such as nylon, UHMWPE, POM, and
Both are lightweight, corrosion-resistant, wear-resistant, and suitable for CNC machining. However, they perform very differently
Wear is a common cause of failure in conveyor systems, packaging machinery, automated equipment, mining
CNC machining is widely used to produce plastic prototypes, low-volume parts, replacement components, jigs, fixtures,
Both are lightweight, corrosion-resistant, wear-resistant, and suitable for CNC machining. However, they perform very differently
Wear is a common cause of failure in conveyor systems, packaging machinery, automated equipment, mining
CNC machining is widely used to produce plastic prototypes, low-volume parts, replacement components, jigs, fixtures,
Need UHMWPE sheets & custom plastic machined/OEM parts？Send specs & material needs, free quote within 24h.
