Molybdenum Disulfide Nylon Sheet is a black modified polyamide sheet designed for wear-resistant, sliding and mechanically loaded industrial components. The MoS2 additive can help improve sliding behavior, reduce friction and support stable wear performance under suitable operating conditions. The supplied size chart contains 11 panel formats from 500 × 1000 mm to 1500 × 3000 mm. Full sheets, cut panels and CNC-machined parts can be supplied according to drawings, required thicknesses and actual working conditions.
Molybdenum Disulfide Nylon Sheet is a modified polyamide engineering plastic containing molybdenum disulfide, commonly abbreviated as MoS2. It is developed for industrial components exposed to sliding, rolling, repeated mechanical contact and abrasive wear.
The material is commonly supplied in a black or dark-colored appearance and can be cut or CNC machined into guide plates, sliding blocks, wear pads, gears, rollers, bushings, sleeves, bearing supports and other machine components.
Molybdenum disulfide is widely used as a solid lubricant. When incorporated into an appropriate nylon formulation, it can help improve sliding behavior and reduce friction between the finished nylon component and a metal shaft, rail, guide surface or other mating part.
The actual mechanical, friction and wear performance depends on the base nylon grade, MoS2 content, production process, material conditioning, load, speed, temperature and mating surface. The exact formulation should therefore be confirmed before production rather than identified by black color alone.
Visit our Polyamide PA Nylon Sheet category to review our nylon material supply and machining capabilities. You can also jump directly to the available sheet sizes, technical specifications, typical applications and CNC machining services below.
For general background information, visit Wikipedia’s explanation of molybdenum disulfide. Additional information about the polymer family is available in Wikipedia’s article about polyamide.
The MoS2-modified formulation is intended to provide stable sliding behavior in suitable mechanical applications. Molybdenum Disulfide Nylon Sheet can be used between moving metal components to reduce hard contact and support smoother movement.
Actual friction performance depends on load, surface finish, operating speed, temperature, moisture condition, alignment and the material used on the mating surface.
Molybdenum Disulfide Nylon Sheet is suitable for parts exposed to repeated rolling, sliding and mechanical contact. Common products include guide plates, wear strips, sliding blocks, gears, bushings, rollers and bearing pads.
Correctly designed nylon components can help protect shafts, rails, machine frames and other higher-cost equipment parts from direct wear.
The solid-lubricant modification may reduce the frequency or quantity of external lubrication required in selected low-speed and medium-speed applications. This can be useful for equipment positions that are enclosed or difficult to lubricate regularly.
MoS2 modification does not mean that grease or oil is never required. Additional lubrication may still be necessary under high load, high speed, continuous operation, high temperature or poor alignment.
The nylon base material provides a useful balance of strength, rigidity and toughness for mechanical components. It can be selected for parts where ordinary general-purpose plastics may deform or wear too quickly.
The load-bearing capacity of the finished component depends on its thickness, supporting distance, fastening arrangement, operating temperature and whether the applied load is static, dynamic or intermittent.
Replacing suitable metal guides, gears, rollers, sleeves or wear pads with Molybdenum Disulfide Nylon Sheet components can help reduce hard contact, vibration and operating noise.
This is beneficial for conveyor systems, packaging machinery, textile machinery, lifting equipment and automated production lines where repeated metal contact creates noise.
The nylon material does not rust like ordinary carbon steel. It can therefore be used in humid industrial environments and selected applications where unprotected metal components are affected by moisture.
Chemical compatibility should be confirmed before use with strong acids, strong alkalis, oxidizing chemicals or unusual solvents.
Molybdenum Disulfide Nylon Sheet can be saw cut, milled, drilled, bored, tapped, slotted, countersunk and machined into complex profiles. It can be supplied as a full panel, cut blank or finished component.
Thick or precision parts may require rough machining, controlled resting, semi-finishing and final machining to reduce dimensional movement caused by internal stress, clamping and material removal.
The nylon base material may provide useful electrical insulation in a dry condition. Selected grades can be used for mechanical supports, spacers, guide components and protective separation parts.
Moisture absorption and the MoS2 formulation may affect electrical properties. Electrical resistance or insulation performance must therefore be verified when the component is used in an electrically sensitive application.
The supplied manufacturable-size image contains 11 Molybdenum Disulfide Nylon Sheet panel formats. The image only lists panel length and width; no thickness information is shown.
The dimensions below are standardized as length × width. Sheet thickness, dimensional tolerance, flatness, surface finish, stock status and production time should be confirmed separately before ordering.
| Number | Available Sheet Size | Thickness |
|---|---|---|
| 1 | 610 × 1200 mm | Confirmed according to order |
| 2 | 500 × 1000 mm | Confirmed according to order |
| 3 | 1000 × 1000 mm | Confirmed according to order |
| 4 | 1000 × 2000 mm | Confirmed according to order |
| 5 | 1100 × 2200 mm | Confirmed according to order |
| 6 | 1200 × 2400 mm | Confirmed according to order |
| 7 | 1220 × 2440 mm | Confirmed according to order |
| 8 | 1220 × 3040 mm | Confirmed according to order |
| 9 | 1220 × 3100 mm | Confirmed according to order |
| 10 | 1500 × 2500 mm | Confirmed according to order |
| 11 | 1500 × 3000 mm | Confirmed according to order |
Size summary: The supplied chart includes 11 panel formats. The smallest listed format is 500 × 1000 mm, while the largest listed format is 1500 × 3000 mm. Large-format options also include 1220 × 3040 mm and 1220 × 3100 mm.
These dimensions represent manufacturable or selectable sheet formats rather than guaranteed stock. Availability may vary according to thickness, nylon grade, MoS2 formulation, order quantity and production schedule.
When a sheet will be machined into a finished component, the raw blank should normally be larger and thicker than the final part. Suitable allowance must be reserved for cutting, clamping, surface cleaning, rough machining and final finishing.
| Item | Typical Specification |
|---|---|
| Product name | Black Molybdenum Disulfide Nylon Sheet |
| Abbreviation | MoS2 Nylon Sheet |
| Material family | MoS2-modified polyamide / nylon engineering plastic |
| Color | Black or dark gray, depending on formulation |
| Listed number of formats | 11 panel sizes |
| Smallest listed format | 500 × 1000 mm |
| Largest listed format | 1500 × 3000 mm |
| Sheet thickness | Not shown in the supplied image; confirmed according to order |
| Base nylon grade | Confirmed according to material specification and application |
| MoS2 content | Confirmed according to the selected formulation |
| Supply form | Full sheet, cut panel, machining blank or finished CNC component |
| Available processing | Cutting, milling, drilling, boring, tapping, slotting, countersinking and profile machining |
| Dimensional tolerance | Confirmed according to sheet format, thickness, material condition and drawing |
| Final suitability | Depends on load, speed, temperature, humidity, lubrication and mating material |
Technical note: The coefficient of friction, wear rate, density, tensile strength, compressive performance and allowable operating temperature can vary between different MoS2 nylon formulations. Final values should be confirmed using the applicable material data sheet or agreed technical specification.
Molybdenum Disulfide Nylon Sheet can be machined into guide plates, side guides, positioning rails and machine guiding surfaces. Its sliding characteristics help support smoother movement between mechanical components.
Thick sheet or block material can be processed into sliding blocks, reciprocating guides, adjustment blocks and equipment support components.
Installation clearance should be determined according to load, movement distance, operating temperature, humidity and the mating surface.
The material is suitable for wear plates, pressure pads, bearing pads and equipment-protection components. Nylon wear parts can separate moving metal surfaces and protect the main equipment structure.
Suitable sheet and block thicknesses can be machined into gears, sprockets and transmission components. Nylon parts may help reduce component weight, operating noise and impact on mating metal gears.
Gear diameter, tooth profile, torque, speed, temperature and lubrication must be evaluated before confirming the material grade.
Molybdenum Disulfide Nylon Sheet or thick blanks can be machined into bushings, guide sleeves, bearing supports and wear rings.
Running clearance should account for shaft diameter, radial load, speed, operating temperature and nylon moisture absorption.
The material can be machined into conveyor rollers, guide wheels, support wheels and positioning rollers. For predominantly cylindrical components, a nylon rod or cast block may reduce raw-material waste.
Typical conveyor applications include chain guides, chain supports, wear strips, side guides and transfer plates. Reduced sliding resistance can help lower operating noise and chain drag.
The sheet can be used for fixture plates, positioning blocks, machine guides, sliding supports and adjustment components in packaging and automation equipment.
MoS2-modified nylon can be used for guide components, wear supports, sliding plates, rollers and machine parts exposed to repeated movement.
Finished components can be manufactured when an original metal or standard plastic part is worn, noisy, corroded or difficult to obtain. Production can be based on drawings, samples, three-dimensional models or measured installation dimensions.
Standard nylon already provides useful wear resistance, toughness and sliding performance. Molybdenum Disulfide Nylon Sheet incorporates MoS2 into the nylon formulation to improve sliding or wear behavior for selected mechanical applications.
The actual improvement depends on the base resin, additive amount, manufacturing process and operating conditions. Black color alone should not be used as proof of MoS2 content.
MoS2-filled nylon and oil-filled nylon are both modified materials, but they do not necessarily use the same additive system or provide identical friction, wear and temperature performance.
MoS2 is a solid lubricant, while oil-filled materials contain a lubricating oil or another liquid lubricant system. The correct grade should be selected according to load, speed, lubrication condition, temperature and mating material.
MoS2-modified nylon can provide useful toughness, wear performance, vibration damping and mechanical strength for gears, guides, rollers and support components.
POM normally absorbs less moisture and may provide better dimensional stability in some precision sliding, positioning and close-fitting applications. Selection should consider humidity, tolerance, load, friction, speed and temperature.
Nylon is hygroscopic and can absorb moisture from the surrounding environment. Moisture may improve toughness but can also affect dimensions, rigidity and electrical performance.
The following factors should be reviewed for precision-machined parts:
For components requiring close tolerances, the material condition, machining environment and final inspection method should be agreed before production.
Black Molybdenum Disulfide Nylon Sheet can be supplied as a full panel, cut blank or finished component manufactured according to two-dimensional drawings, three-dimensional models, physical samples or installation measurements.
Available machining processes include:
For thick or heavily machined components, production may include blank cutting, rough machining, controlled resting, semi-finishing and final precision machining. This processing sequence can help reduce deformation and improve dimensional consistency.
The selected Molybdenum Disulfide Nylon Sheet should normally be larger and thicker than the finished component. Sufficient allowance is required for cutting, clamping, surface finishing and final dimensional correction.
Please provide the following information before production:
The supplied image contains 11 listed panel formats ranging from 500 × 1000 mm to 1500 × 3000 mm.
No. The uploaded chart only lists sheet length and width. Thickness must be confirmed separately according to the required component and production capability.
Yes. It can be machined into guide plates, sliding blocks, wear pads, gears, bushings, sleeves, rollers and other industrial components.
No. Black color may come from pigment, carbon black or other additives. The material specification should clearly identify molybdenum disulfide content.
No. The MoS2 additive may reduce friction and lubrication requirements, but grease or oil may still be required under demanding loads, speeds or temperatures.
Yes. The nylon base polymer can absorb moisture, which may influence dimensions, rigidity and electrical performance.
Yes. Full sheets, cut blanks and finished CNC-machined components can be supplied according to drawings, models, samples or measured installation dimensions.
No. The chart represents manufacturable or selectable formats. Actual stock depends on thickness, material grade, quantity and production schedule.
Other panel formats can be evaluated according to required thickness, material grade, order quantity, production process and finished-part drawing.
Check drawings for full specifications and confirm materials according to service conditions to prevent product defects.
Inspect all key processing steps and fully verify dimensions, holes, grooves and fitting surfaces.
Deburr, chamfer and clean products for easy installation. Ensure uniform quality among batch products.
Choose appropriate packaging solutions based on product features to protect goods from collision, deformation and mixing during transit.
Unlike metal parts, engineering plastic components still require strict control over dimensions, holes, edges, surface, materials and assembly performance for equipment use.
Engineering plastic parts suit friction, guide, support, buffer, anti-corrosion and insulation areas. We supply UHMWPE, POM, PA, PP/PE components for conveyor, food, mining, machinery, chemical and cable systems, with custom OEM service available.
Stay updated with our latest industry insights, company updates and featured articles.
Engineering plastics are increasingly used in industrial machinery, automated production lines, conveyor systems, packaging equipment, and food-processing machines. Materials such as nylon, UHMWPE, POM, and
Both are lightweight, corrosion-resistant, wear-resistant, and suitable for CNC machining. However, they perform very differently
Wear is a common cause of failure in conveyor systems, packaging machinery, automated equipment, mining
CNC machining is widely used to produce plastic prototypes, low-volume parts, replacement components, jigs, fixtures,
Both are lightweight, corrosion-resistant, wear-resistant, and suitable for CNC machining. However, they perform very differently
Wear is a common cause of failure in conveyor systems, packaging machinery, automated equipment, mining
CNC machining is widely used to produce plastic prototypes, low-volume parts, replacement components, jigs, fixtures,
Need UHMWPE sheets & custom plastic machined/OEM parts？Send specs & material needs, free quote within 24h.
