<p><strong>Oil-Filled Nylon Rod</strong> is a green self-lubricating cast PA6 round bar developed for sliding, bearing and wear applications. It offers good abrasion resistance, smooth running performance, low operating noise and reduced external lubrication requirements. Reference diameters range from 15 mm to 150 mm, with a reference length of 1000 mm. CNC machining is available for bushings, gears, rollers, guide blocks, pulleys and other industrial components.</p>
Oil-Filled Nylon Rod is a green self-lubricating cast PA6 round bar modified with an internally distributed lubricant. It is designed for sliding, bearing and wear applications where frequent external lubrication is difficult, inconvenient or undesirable.
Compared with standard unmodified cast nylon, the lubricated material can provide smoother sliding performance, reduced friction, lower stick-slip tendency and less frequent maintenance when correctly selected for the operating conditions. The lubricant is distributed throughout the material rather than applied only to the surface, allowing the machined component to maintain its lubricating characteristics after turning, milling or drilling.
For additional PA rod grades and related materials, please visit our
Polyamide PA and Nylon Rod
product category. Nylon belongs to the polyamide family of engineering polymers. More general information about the material is available from
Wikipedia’s explanation of nylon.
Green oil-filled nylon rod can be machined into a wide range of industrial components, including:
The final material grade should be selected according to load, sliding speed, operating temperature, mating material, moisture level and dimensional tolerance requirements.
The following dimensions are based on the reference sizes shown in the supplied product image:
| Item | Reference Specification |
|---|---|
| Material | Oil-filled cast nylon / lubricated cast PA6 |
| Common Color | Green |
| Reference Diameters | 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100, 110, 120, 130, 140 and 150 mm |
| Reference Length | 1000 mm / 1 meter |
| Machining | Turning, milling, drilling, boring, grooving, tapping and cutting |
Size notice: The dimensions above are reference production and sales sizes rather than a guarantee of immediate stock. Actual diameter, length, machining allowance, straightness and tolerance should be confirmed before ordering. Other dimensions and finished components can be produced according to drawings or samples.
The rod can be processed into finished nylon components by CNC turning, milling, drilling, boring, grooving, tapping and chamfering. Our
CNC plastic machining service
supports prototype production and batch manufacturing according to customer drawings, samples and operating conditions.
Because nylon can absorb moisture and its dimensions may change with temperature and humidity, machining tolerances and installation clearances should be determined according to the actual working environment. Components requiring very tight tolerances may need conditioning and dimensional inspection before final assembly.
Oil-Filled Nylon Rod is suitable for customers requiring a machinable engineering plastic with wear resistance, smoother sliding performance and reduced lubrication maintenance. Material selection, machining allowance and component structure can be confirmed according to the equipment and working conditions.
Check drawings for full specifications and confirm materials according to service conditions to prevent product defects.
Inspect all key processing steps and fully verify dimensions, holes, grooves and fitting surfaces.
Deburr, chamfer and clean products for easy installation. Ensure uniform quality among batch products.
Choose appropriate packaging solutions based on product features to protect goods from collision, deformation and mixing during transit.
Unlike metal parts, engineering plastic components still require strict control over dimensions, holes, edges, surface, materials and assembly performance for equipment use.
Engineering plastic parts suit friction, guide, support, buffer, anti-corrosion and insulation areas. We supply UHMWPE, POM, PA, PP/PE components for conveyor, food, mining, machinery, chemical and cable systems, with custom OEM service available.
Stay updated with our latest industry insights, company updates and featured articles.
Engineering plastics are increasingly used in industrial machinery, automated production lines, conveyor systems, packaging equipment, and food-processing machines. Materials such as nylon, UHMWPE, POM, and
Both are lightweight, corrosion-resistant, wear-resistant, and suitable for CNC machining. However, they perform very differently
Wear is a common cause of failure in conveyor systems, packaging machinery, automated equipment, mining
CNC machining is widely used to produce plastic prototypes, low-volume parts, replacement components, jigs, fixtures,
Both are lightweight, corrosion-resistant, wear-resistant, and suitable for CNC machining. However, they perform very differently
Wear is a common cause of failure in conveyor systems, packaging machinery, automated equipment, mining
CNC machining is widely used to produce plastic prototypes, low-volume parts, replacement components, jigs, fixtures,
Need UHMWPE sheets & custom plastic machined/OEM parts？Send specs & material needs, free quote within 24h.
